SG Broadband Community

redxii1234

Originally posted by TonyT
Do yopu mean Sleep Mode or Hibernate Mode?
(two different modes)

Hibernate mode. A selection from Start > Shut Down.

redxii1234

Thanks anyway. I will just have to do without until I can get a new sound card.

redxii1234

Plain and simple; when I install my sound card drivers and reboot, I lose the option to do a Hibernate.

Sound card is a Aureal au8810.
OS is Windows ME
MS6199VA motherboard
-I also use a:
--3COM PCI ADSL Modem
--nVidia Riva TNT2 M64 video card

Is there any way to keep Hibernate when my sound card ...

redxii1234

I want to make my ConnectionsPerServer in IE to 20, should it be hexadecimal or a decimal value?

redxii1234

How real does this look?!

Fooled you all!!!

I actually get 160kb/sec on 1260/220

Fix your pic CableDemon

redxii1234

Ya, i know.

"The longer the cord the more the signal will have to travel in turn slower speeds... in this case the short the better." Just an email from BellS.

redxii1234

Anyway, my first hop is 1ms consistently, when it used to be somewhere 20 to 30ms.

redxii1234

My computer supports AGP Bus Transfer Rate up to 4X(MAX), and was wondering if at all it does anything?

Also, I can tweak this w/ a Savage tweaker, or do I have to do it in the BIOS?

redxii1234

Router troubles, servers being infected with 2 viruses/worms

redxii1234

I read that DSL can still get slow at peak times, but even then it still isn't being shared, never ever, not in a billion years that it will be shared.

redxii1234

10,000,000bps connection downstream, also means download, can be 160 times faster than regualr 56K and transfer rates can be up to 810 KiloBytes(KB) per second.

redxii1234

http://www.dslreports.com/front/DRTCP019.exe

redxii1234

Go to http://www.dslreports.com and download DrTCP and change your settings back.

redxii1234

I assume you have BellSouth FA. No? Then what do you have and what are the advertised speeds? What do you normally download at(kb/s)? What are you currently downloading at(b/s)?

Me:
1500-256 / 155kbs / 30kbs

redxii1234

Seems to have done nothing to it, except go a little faster. Got any links for twisted?

redxii1234

The reason I ask is that I get worse on 12ft of wire(connected to an inline coupler[it connects two 4pin wires together]) and better with 50ft(single wire) with 6pins. Any Ideas?

redxii1234

Goto http://www.dslreports.com and then the BellSouth forum.

redxii1234

If ya want help, go to http://www.dslreports.com and on the BellSouth forum.

redxii1234

Any packet loss = bad,evil,wicked.

Oh, 32 bytes issue...well, look below;

ping -l xxxx google.com

Xxxx represents your MTU. THat is not an I, it is an ell. I get 0% on DSLR, I did more than just one test. You might want to do more than one and add up and get the average.

redxii1234

Look at the pic:
http://members.aol.com/redxii1234/image1.jpg
Select the correct ADAPTER and you can use a tweak test tool from DSLR to give out some RWINS:
http://www.dslreports.com on the left side menu Tools then Tweak Tester. IF you make your RWIN 65535 or higher, then enable(Yes) for Windows ...

redxii1234

Goto http://www.dslreports.com/front/DRTCP019.exe

for Drtcp

redxii1234

It wouldn't be hard to change it to 3.3v and see if it works.

redxii1234

Try calling tech support.

redxii1234

You can buy a sub zero cooler to help keep the temperature down.

http://www.tweak3d.net look under "How to Guides".

redxii1234

I'm sure someone out there has a T3, 43mbps.

redxii1234

Hopefully!!!!! I will get a VooDoo, ithink 3 4 or 5. Retail 60-80$. I will buy more ram first of the month, 256 mb SDRAM PC100 3.3v for about 50$.

redxii1234

Maybe this will make it easier?
--------------------------------------
Windows 98SE
550E MHz PentiumIII
160 SDRAM
S3 Savage4 16MB and 32 MB AGP
13.9GB(C: ),3.58GB(D: ),4G[E:, partition of C:]
Sony CRX100E CdRW
Mat****a(???) Cdrom
BIOS: Award Modular BIOS v4.51PG, 256K ROM size, VIA 82C691 rev 68
L2 ...

redxii1234

Any links to reliable, not faulty, 512K L2 cache. Thanks in advance.

redxii1234

I use PPPoA, 1500 downstream and 256 upstream. My sound card has no IRQ assigned and it still worked. Some local computer genius came by and fixed it. All is well and working, one one problem is that all my IRQs are filled up. It says it can use IRQ 5 7 and 11. My lucent winmodem is...i mean was 5 ...

redxii1234

Ok, set your MTU to 1500 and MSS 1460! RWIN set to 32767. TTL set to 128. Email me, redxii1234@aol.com, if you want more tweaks.

redxii1234

redxii1234

We just got ADSL and the sound card has a problem, but it still works though. I uninstalled the old V90 modem. The card is s'posed to be on 12IRQ, but no IRQ is assigned.

Not a problem, just weird.
------
550MHz
160MB RAM
14.9 and 3.58 GB HARD DRIVE
S3 Savage 4 Video Card
Aureal Vortex Sound Card

redxii1234

*discard this message*

SG Broadband Community

Search found 33 matches

Re:

Thanks

WinME: Sound card disables hibernate

Webpatch

PIC

..

AGP 4X on Savage4

trouble

ADSL

Maybe....

ADSL

Is a shorter wire really better?

DSLR

DSLR

What's a title??!?!

Settings

DrTCP

Experiment

Call tech support

Cooler

T3

Ram and $$$

Specs

I need cheap, reliable 512k L2 Cache Memory

Happens to me too

Settings

Ya

Heh...Sound Card, no IRQ

*