The Broadband Guide
SG
search advanced

TP-Link TL-WR743ND

details: 150Mbps Wireless AP/Client Router
hardware type: Wireless Router
date added: 2010-08-06
updated: 2013-04-24
TP-LINK Wireless AP/Client Router TL-WR743ND is a combined wired/wireless network device, which integrates the functions of Wireless Access Point, AP Client, firewall, 4-port Switch and NAT-Router. It could effectively work as a client device with the support of a WISP, and the local computers can connect to it wirelessly or via cables. It also features QSS function, establishing a highly secured wireless link at a push of the QSS button (a.k.a WPS button) on the devices exterior. Better still, TL-WR743ND supports Passive PoE, convenient for hardware deployment for places without an electrical outlet.

Complying with the IEEE 802.11n standard, TL-WR743ND can establish a wireless network and get up to 9X the speed and 4X the range of legacy IEEE 802.11g products. With transmission rates up to 150Mbps, it delivers performance enhancements, allowing you to have a more joyful surfing experience, including sharing files, watching streaming media and VoIP applications.

Compatible with WI-FI Protected Setup (WPS), TL-WR743ND features Quick Security Setup (QSS) Button that allows users to almost instantly setup the highly secure wireless link simply by pressing the QSS button automatically.
 
 
 
 TL-WR743ND Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: 10/100 Base-TX (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 MAC Address clone: yes
 Wireless
 Maximum Wireless Speed: 150 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (draft)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
 WiFi modes: Access point
Wireless client
WISP mode
 external antenna(s): 1
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 5 dBi
 Transmit Power: +20 dBm
 Receiver Sensitivity: -68 dBm
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
 Misc hardware info
 Power over Ethernet (PoE): yes
 Links
 Product page: http://www.tp-link.com/en/products/detai...
 Datasheet: http://www.tp-link.com/Resources/documen...
 Manual: http://www.tp-link.com/Resources/documen...
 Quick Install Guide: http://www.tp-link.com/Resources/documen...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About