The Broadband Guide
SG
search advanced

NetComm NB9W

details: ADSL2+ Wireless Modem Router VoIP Gateway
hardware type: VoIP Gateway
date added: 2010-02-07
updated: 2013-04-15
The NB9W is a wireless ADSL2+ router with one RJ-11 WAN port, four 10/100Base-T LAN ports, two FXS ports (RJ-11) for VoIP, and a single FXO port.

The integrated access point complies with IEEE 802.11b/g standards, providing wireless transmission speeds of up to 54Mbps. It supports WEP and WPA wireless encryption and uses WMM (QoS) to prioritize the traffic over the network.

The NB9WMAXX supports a variety of VoIP features, such as Caller ID, Call Waiting and Echo Cancellation.

This router provides VPN pass-through for IPSec, L2TP and PPTP. A built-in SPI firewall protects the network against hackers and Denial of Service (DoS) attacks.
 
 
 
 NB9W Features
 General
 Availability: discontinued
 List price: $299
 Warranty: 1 year(s)
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 RJ-11 FXS VoIP phone ports: 2
 RJ-11 FXO VoIP PSTN wall jack port: 1
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: yes
 ToS / DiffServ: yes
 Transparent Bridging (IEEE 802.1d): yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
 PPPoE client: yes
 PPPoA client: yes
 VoIP
 VoIP Protocols: SIP v2 (RFC 3261)
SDP (RFC 2327)
RTP / RTCP (RFCs 1889/1890)
 VoIP Audio Codecs: G.711 (PCM)
G.723.1
G.729 (a/b)
 VoIP Voice Features: Echo Cancellation (G.165/G.168)
Caller ID
Call waiting
Call transfer
Call forward
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
 Wifi security/authentication: WEP
WPA (TKIP)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
 WiFi modes: Access point
Wireless bridge (PtP)
 WDS compatible: yes
 WMM (QoS): yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: IP Address filtering, MAC Address filtering, packet filtering, date/time scheduling
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Telnet / CLI
SSH
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
 Misc hardware info
 SNMP support: SNMP v.2
 NTP client: yes
 Links
 Product page: http://www.netcommwireless.com/product/v...
 Datasheet: http://www.netcomm.com.au/__data/assets/...
 Manual: http://www.netcomm.com.au/__data/assets/...
 Quick Install Guide: http://www.netcomm.com.au/__data/assets/...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About