The Broadband Guide
SG
search advanced

Lancom L-451agn

details: Single-radio Dual Band Wireless-N Acess Point
hardware type: Wireless Access Point
date added: 2012-12-13
updated: 2015-02-10
The Lancom L-451agn Wireless AP can achieve a physical data rate of up to 450 Mbps (gross). Numerous mechanisms - such as the MIMO technology, the use of 40-MHz channels, packet aggregation, and block acknowledgment - increase the available bandwidth and ensure the smooth operation of applications that place tough demands on performance.

The LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external DSL modems (PPPoE) or external routers.

This access point can be operated in standalone mode and managed with the free administration tools, or it can be centrally managed by a Lancom WLAN controller.
 
 
 
 L-451agn Features
 General
 Availability: currently available
 Warranty: 3 year(s)
 LAN / WAN Connectivity
 LAN ports: 1
 LAN ports type: Gigabit Ethernet (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: yes
 ToS / DiffServ: yes
 Routing Protocols: Spanning Tree Protocol (STP)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
 Wireless
 Maximum Wireless Speed: 450 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
Multipoint bridge (PtMP)
 external antenna(s): 3
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 3 dBi
 Transmit Power: +18 dBm
 Receiver Sensitivity: -80 dBm
 Multiple SSID: yes
 WMM (QoS): yes
 WMM-PS (QoS): yes
 Dual Band (2.4GHz/5GHz): yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Intrusion Detection System (IDS): yes
 Filtering: Domain/URL blocking, packet filtering
 Device Management
 Default IP address: 172.23.56.254
 Administration: Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
SSH
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Email alerts: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
ping, traceroute
 Misc hardware info
 SNMP support: SNMP v.2
 IPv6 support: yes
 NTP client: yes
 Power over Ethernet (PoE): yes
 Notes: The AP features one serial configuration interface / COM port (8 pin Mini-DIN).
 Links
 Product page: http://www.lancom-systems.de/en/products...
 Datasheet: http://www.lancom-systems.de/download/LC...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About