| ECB-9500 Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP server: |
|
| DHCP client: |
|
| QoS: |
|
| Routing Protocols: |
VLAN tagging (802.1q)
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
Wireless client
Wireless bridge (PtP)
Repeater mode
|
| external antenna(s): |
3 |
| ext antenna(s) removable ?: |
|
| Antenna connector: |
RP-TNC (Reverse TNC)
|
| Antenna gain: |
5 dBi |
| Transmit Power: |
+16 dBm |
| Receiver Sensitivity: |
-75 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management
|
| Default IP address: |
192.168.1.2 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
ping |
| Misc hardware info
|
| Chipset: |
RT2880, 266MHz |
| RAM: |
32 Mb |
| Flash Memory: |
8 Mb |
| SNMP support: |
SNMP v.1, SNMP v.2
|
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Links
|
| Product page: |
http://www.engeniustech.com/products/dis... |
| Datasheet: |
http://www.speedguide.net/images/hardwar... |
| Manual: |
http://www.speedguide.net/images/hardwar... |
| Quick Install Guide: |
http://www.speedguide.net/images/hardwar... |
